Motrona Interfaces Interfaces module allows you to convert various signal formats that includes
Frequency Voltage Serial. SSI Analogue Serial parallel. Incremental
Counter Analogue Serial. Module offers excellent price-to-performance ratio. Very short conversion times, high accuracy & extremely wide range of frequencies is the unique features of these products.
Signal Converters and Conditionerss Motrona signal converters are multifunctional converter module with fast response time and many programmable features for conversion of frequencies to voltage, to current or to serial data format .Some modules also offer scalable LCD display for indication of the actual input frequency and the operating state. It can accept universal impulse imputs for use with single channel signals (A only), quadrature signals (A, B, 2x90°) or differential TTL / RS422 signals A, /A, B, /B & can give analogue outputs +/- 10 V (polarity represents direction of rotation) and 0/4 – 20 mA, with 14 resolution bits.The unit is having wide operationg range from  0.1 Hz to 1 MHz.
SSI Converters and Conditioners These signal converters are suitable to translate any angular or positional information from an encoder or a linear scale into an analogue signal or a serial or a parallel data format.SSI Signal converter suitable for use with all SSI type sensors and absolute encoders from 9 to 25 bits, either with Master mode or with Slave mode. Also these converters are suitable to convert SSI data from an absolute encoder or sensor to parallel data, either with Master or Slave operation. Incremental Signal converter suitable for use with all incremental encoders, proximity switches etc. either with TTL/RS422 output or with HTL (10-30V) output Analogue outputs +/- 10V, 0-20 mA or 4-20 mA, proportional to the encoder position.
Level Converters, Potential Separators, Direction Translators Motrona level converter product range allows you to convert different signal levels into each other. Signal inputs A, /A, B, /B, Z, /Z are adjustable to TTL/RS422 level or to HTL (10-30V) level Signal outputs A, /A, B, /B, Z, /Z (push-pull), output level depending on remote voltage (Vext. = 5 - 30V) Suitable for conversion of a A/B quadrature direction signal to a static direction signal and vice-versa.
Impulse Distributors, Splitters, Switchers Encoder Splitters and Impulse Distributors are used for proper and trouble-free signal distribution between incremental encoders or measuring systems and several target devices.Encoder Switchers are used for signal switch-over from several incremental encoders to one or more target devices. Most of the units provide level conversion of encoder signals (Level Converter) and Potential Separation (galvanic isolation) between input and output signals.
Frequency Dividers, Frequency Multipliers Impulse and frequency divider products are used for frequency division of incremental encoder signals. Frequency divider offers error-free division of quadrature encoder signals, with adjustable ratio from 1:1 to 1:4096, with separately adjustable divider for marker pulse. It also includes translation between various modes of indication of the direction of rotation. Max input frequency of the product is up to 300 kHz Frequency multiplier provides one encoder input and one encoder output, both using channels A, /A, B, /B, Z, /Z with programmable levels and characteristics.The unit provides error-free multiplication of an input frequency by a proportional factor F1 and a reciprocal factor F2, both adjustable in a range of 0.0005 to 9.9999. The result appears at the frequency output.
Further information is available under applications