TRIO Motion Coordinators
The Motion Coordinator system allows you to control up to 128 servo or stepper motors with Digital I/O and additional equipment such as HMI’s all controlled from a single master. Systems may be used with a stand alone program or alternatively commands can be sent from an external computer
MC403-Z Pulse & Dir Controller
MC403 – MC403-Z
P821 (MC403-Z) | P822 (MC403-Z) | P823 (MC403) | P824 (MC403) | P825 (MC403)
The MC403 is a high specification Motion Coordinator using a high performance ARM11 processor, with three flexible axis ports and two Voltage outputs.
MC403 Servo , Pulse & Dir Controller
MC403
P821 (MC403-Z) | P822 (MC403-Z) | P823 (MC403) | P824 (MC403) | P825 (MC403)
The MC403 is a high specification Motion Coordinator using a high performance ARM11 processor, with three flexible axis ports and two Voltage outputs.
MC405 Servo , Pulse & Dir Controller
MC405
P826 (stepper) | P827 (servo)
The MC405 is a high specification Motion Coordinator using a high performance ARM11 processor, with five flexible axis ports and four Voltage outputs.
MC508 Servo , Pulse & Dir Controller
MC508
P848 | P849
The MC508 is a high specification Motion Coordinator using a high performance ARM Cortex A9 800 Mhz Processor, with eight Voltage outputs and eight flexible axis ports, that can be configured for up to sixteen pulse and direction output axes or eight closed loop servo axes. It boasts 128 MBytes of RAM; 32 of which is for user programs and user table space.
MC664 Servo , Stepper Controller EtherCAT
MC664
P861 (Single Core) | P862 (Quad Core)
The MC664-X… Quad core A9 processor, Dedicated communications core, up to 128 axes and built-in EtherCAT port all adds up to the most versitile Motion Coordinator yet.